Polyethene - A durable material available in several colors. Comes pre-assembled!
TopSpa XS is a fully insulated spa, built according to our "thermos principle" with interconnected base insulation, side insulation and an insulated cover. This provides an effective, safe and energy-saving layer of insulation all around. TopSpa XS has filtration as standard and thermostatically controlled heating (3 kW). Also included is a bubble system (air valve is located between each seat), insulated cover. Inside the insulated special steps is also located the filters, pumps and electric heaters.
The equipment for heating, filtration and bubble massage are installed in the insulated box which is also serves as part the steps to easily get in and out.
Drain grate at the bottom with valve (blue) in the insulated box
Air jets are located between seats
Always ready for use. Expect 15 hours of heating after replacing the water, which should be done 3-4 times a year. The spa is then maintained at the set temperature. You don't need to spend time planning your bathing or when to start heating, the bath is always ready to be used for what it was intended. Easy drainage and maintenance.
Explanation to picture
- Pressure side
- Suction side
- LED (accessory)
- Bubble jet
- Outer diameter: 1810 mm
- Inner diameter: 1660 mm
- Internal height 1000 mm, external 1120 mm
- Water volume: 1200 l
- Number of benches: 6 pcs
- Seating: 6 pcs
- Bench height: 350 mm
- Filter / heating package: 20 kg
- Insulated box with stairs: 45 kg
- Mounted and clad spa: 120 kg
- Total weight: 227 kg
- Material: polyethene (available in several colors)
- Electrical connection 230V, 1-phase, 16A
- Electric heater: 3 kW, thermostatically controlled
- Air pump: 700W
- Insulated lid: 100/70 mm
- Wall insulation 40 mm
- Bottom insulation 50 mm
This product includes among others the following products: