A great achievement of design, made in heat-treated pine and a transparent coating on the inner surface.
The AquaStar 150 is a luxurious hot tub made of heat-treated pine. 150 cm diameter on the inside with six seats. The measurements of the outside are 185x185cm. It includes an automatic filtration system
, a bubble system
, thermostatically controlled heater
(3kW), an insulated cover. Four jet massage units
are placed on the inside walls. The inside walls, benches and the base
have black fillings between the gaps of each stave and then the TubCoat
(a transparent, elastic coating) has been applied on top of that which gives the finnishing touch. Its appearance gives the impression of boat decks made of teak. The TubCoat
provides a durable surface which makes it easy to keep clean. The same technique has been used for the wide square-shaped rim. An accessory which can be added if requested is the underwater lightning.
All those functions are controlled via an electronically controlled system called SpaTouch
Filter, pumps, electric heater as well as the electronical control system are well protected inside the insulated walls
and a base plate. The electric power consumption on stand-by and the filtration are around 5 kWh per day at a water temperature of 37 °C. The design has no problems coping with temperatures as low as -30°C
. In each corner there are two openings
to give access in case of maintenance which can be opened and closed if necessary
It is easy to drain water via the plug hole
, which can change colours automatically or just simply lightning with only white light can be chosen as an accessory.
This product includes among others the following products: