Polar AquaStar - For Comfortable Year Round Usage


A GREAT ACHIEVEMENT OF DESIGN, MADE IN HEAT TREATED PINE AND A TRANSPARENT ELASTIC COATING ON THE INNER SURFACE.

Allow yourself a little bit of luxury and healing massage in temperate water for the perfect relaxation.





The AquaStar is a luxurious hot tub made of heat-treated pine. Diameter on the inside is 150 or 180 cm with six or eight seats. Aquastar comes with an automatic filtration system, a bubble system, thermostatically controlled heater, 4 massage seats with 6 jets each and an insulated cover. The measurements of the outside are 185x185cm or 210x210cm.



The wide square-shaped rim has black caulkings between the gaps of each stave and then the TubCoat (a transparent, elastic material) has been applied on top of that which gives the finnishing touch. Its appearance gives the impression of boat decks made of teak. The TubCoat provides a durable, elastic surface which makes it easy to keep clean. The same technique has been used for the inside walls, benches and the bottom.


Polar AquaStar 150
Polar AquaStar 180



AQUASTAR 150/180
  • Elastic coating (TubCoat)
  • Fully insulated
  • Automatic filtration
  • Thermostatically controlled heater
  • Insulated lid
  • Low energy consumption
  • Electronic control system
  • Bubble system
  • Massage system (AquaKing Jets)

With SpaDealers "SpaTouch" you have easy control over the various functions of the hot tub

Led-lighting, which can change colours automatically can be chosen as an accessory





INSULATION, FILTRATION AND MASSAGE



Filters, pumps, electric heaters and electronic control systems are all well protected inside the insulated walls and bottom plate. In each corner there are two openings to give access when neccessary.

A 550 watt pump handles the circulation for filtration and heating. One 700 watt air pump provides air for the powerful bubble system.


A 40 mm hard polyurethane layer effectively insulates and protects sensitive components like pumps and connections from frost-related damages. The insulative abilities of the hot tub are "topped off" with an insulated lid.

Effective cartridge filter with a filter surface of 9,3 m². Filter should be regularly cleaned depending on the amount of use.


The waterflow for the four massage seats is taken from two powerful 900 watt pumps.

The electric power consumption on stand-by and the filtration are around 5 kWh per day at a water temperature of 37 °C. The construction is able to withstand temperatures of -30 °C.



The Insulation Principle

In the Polar hot tub the cold is held at bay outside even when it's at it's coldest. Everything is well insulated even during an extended power cut.